skip to main text

Feed settings

Select this setting item from (Setup).

Note

  • By registering the paper size and the media type, the message can be displayed before printing starts when the paper size or the media type of the loaded paper differs from the paper settings.

  • Rear tray paper settings

    Registers the paper size and the media type you load on the rear tray.

  • Cassette paper settings

    Registers the paper size you load in the cassette.

  • Detect paper setting mismatch

    If you select Enable, the printer detects whether the paper size and the media type are identical with those registered in Feed settings. If printing starts with the settings that do not match, an error message is displayed on the touch screen.

    Note

    • When Disable is selected, the settings in Feed settings is disabled.

  • Check paper replacement

    If you select ON, the printer detects the paper replacement. A screen for confirming the setting of paper is displayed.

    Note

    • A screen for confirming the setting of paper is not displayed if you select OFF. Set the size and type of paper properly in Rear tray paper settings or Cassette paper settings when making prints.

    • For AirPrint of iOS/iPadOS, paper may be printed based on the paper size set during paper loading. It is recommended to set to ON when making prints using an AirPrint function.